Functionality Upgrade

 

Home
Read this First
KeyMaker X1
KeyMaker LCD
Buy Now
Delivery times
Firmware Update
Functionality Upgrade
Damaged Board
Safety Precautions
User's Guides
EEPROM Locations
Customer Feedback
Reference Docs
New Page 3

KeyMaker Functionality Level Upgrade path for KeyMaker KMX1 or KMX2

This is an Upgrade for KMX1 or KMX2 to a higher LEVEL OF FUNCTIONALITY from what you now have. 

This upgrade offer only applies to KMXX1 and KMX2 boards that have already been Activated. 

If you have either of the 3 Atmega328 boards pictured below and you already have KMX1 firmware on that board then you can upgrade the KMX1 functionality Level by buying a higher level KMX1 Activation Product Key

If you have a KeyMaker board with firmware prior to KMX1 or KMX2 then you first need to upgrade the firmware on your KeyMaker board .. read about firmware Upgrade

If you have a different board, scroll further down this page to ATmega1280 based boards which use KMX2 firmware. 

ATmega328 KeyMaker board - 2 switches, yellow connectors.

ATmega328 KeyMaker board - 3 switches -

ATmega328 KeyMaker board - 2 switches -

Orders will only be accepted from a Verified PayPal account 
Check the Status of your PayPal account before ordering

Upgrade Activation Product Keys are sent by email, same way you received your initial Activation Product Key.

After completing any purchase below  
You need to email your KeyMaker KMX1 board's SERIAL NUMBER to

KeyMaker KMX1 to KMX1PRO upgrade Activation Product Key

USD $40.00 

 

KeyMaker KMX1 to KMX1PROS upgrade Activation Product Key

USD $70.00 

 

KeyMaker KMX1PRO to KMX1PROS upgrade Activation Product Key

USD $30.00 

 

If you have either of the 2 Atmega1280 boards pictured below and you already have KMX2 firmware on that board then you can upgrade the KMX2 functionality Level by buying a higher level KMX2 Activation Product Key

If you have a KeyMaker board with firmware prior to KMX1 or KMX2 then you first need to upgrade the firmware on your KeyMaker board .. read about firmware Upgrade

ATmega1280 KeyMaker board - 3 switches -

ATmega1280 KeyMaker board - 2 switches -

Orders will only be accepted from a Verified PayPal account 
Check the Status of your PayPal account before ordering

After completing any purchase below  
You need to email your KeyMaker KMX2 board's SERIAL NUMBER to

KeyMaker KMX2 to KMX2PRO upgrade Activation Product Key

USD $40.00 

 

KeyMaker KMX2 to KMX2PROPLUS upgrade Activation Product Key

USD $80.00 

 

KeyMaker KMX2PRO to KMX2PROPLUS upgrade Activation Product Key

USD $40.00 

 

TRANSLATION to other languages 

To translate the information on this website to other languages, you may try the following links;

http://www.freetranslation.com/    translates entire web pages, practically unlimited.

 

Disclaimer

I make no warranty that any of my information is correct, or safe, or does or does not breach any warranty clause,  or anything else, it is up to you to decide if you will follow all or any of the instructions to recover the Supervisor Password from a TP. It is up to you to decide, I am not responsible for the results or for any consequential or incidental damages whatsoever.

 If you have any questions WHICH ARE NOT ALREADY COVERED IN THESE PAGES , email Joe at

Hit Counter