Save EEPROM

 

Home
Up
Read this First
KeyMaker X1
KeyMaker LCD
Buy Now
Delivery times
Firmware Update
Functionality Upgrade
Damaged Board
Safety Precautions
User's Guides
EEPROM Locations
Customer Feedback
Reference Docs
New Page 3

Up ] Activate KMX2 ] Activate KMX2 PRO ] Activate KMX2PROPLUS ] KMX2 unlocks TP ] KMX2 Zap ] KMX2+KMX-LCD ] KMX2+PC ] 93C46 Connections ] [ Save EEPROM ] Write EEPROM ] Diagnostic ]

Saving EEPROM data to an Intel Hex file

This information applies to KMX2 PRO and KMX2 PRO Plus

This information applies to both 24RF08 and LSI, only 24RF08 is detailed here.

Only difference when saving LSI EEPROM is to first select LSI

 

 

Instructions are displayed, the following screen captures clarify those instructions.

Scroll the display so you can highlight all of the Intel HEX display

Then Right Click and Cancel the pop-up window

Open a Notepad window

Right click anywhere in the open window and select Paste

 

Save the Notepad file

 

Make a note of what you called the file and where you saved it.

Disclaimer

I make no warranty that any of my information is correct, or safe, or does or does not breach any warranty clause,  or anything else, it is up to you to decide if you will follow all or any of the instructions to recover the Supervisor Password from a TP. It is up to you to decide, I am not responsible for the results or for any consequential or incidental damages whatsoever.

Up ] Activate KMX2 ] Activate KMX2 PRO ] Activate KMX2PROPLUS ] KMX2 unlocks TP ] KMX2 Zap ] KMX2+KMX-LCD ] KMX2+PC ] 93C46 Connections ] [ Save EEPROM ] Write EEPROM ] Diagnostic ]

If you have any questions, email Joe at

Hit Counter