[ Up ] [ Activate KMX1 ] [ Activate KMX1PRO ] [ Activate KMX1PROS ] [ KMX1 unlocks TP ] [ KMX1 Zap ] [ KMX1 + KMX-LCD ] [ KMX1 + PC ] [ 93C46 Connections ] [ Save EEPROM ] [ Write EEPROM ] [ KMX1 Diagnostic ] [ FTDI Driver Install ]
Saving EEPROM data
to an Intel Hex file
applies to KMX1 PRO and KMX1 PRO S
applies to both 24RF08 and LSI, only 24RF08 is detailed here.
Only difference when
saving LSI EEPROM is to first select LSI
KMX2 screen shots
are used, it is the same procedure for KMX1 PRO and PRO S
Instructions are displayed, the following screen captures clarify
Scroll the display so you can highlight all of the Intel HEX
Then Right Click and Cancel the pop-up window
Open a Notepad window
Right click anywhere in the open window and select Paste
Save the Notepad file
Make a note of what you called the file and where you saved it.
I make no warranty that any of my
information is correct, or safe, or does or does not breach any warranty
clause, or anything else, it is up to you to decide if you will
follow all or any of the instructions to recover the Supervisor Password
from a TP. It is up to you to decide, I am not responsible for the
results or for any consequential or incidental damages whatsoever.